Cutting Indian Stone Slabs — Guide & Tips

A bridge saw is the industry-standard tool for cutting full-size stone slabs. It offers a stable cutting platform, adjustable depth, and compatibility with diamond blades suited for hard and soft stone. The Avalanche Pro bridge saw supports cutting lengths up to 150 inches, handles granite, quartz, marble, and natural stone slabs, and offers both manual and automatic operation.

For home or small-scale use, an angle grinder with a dry-cut diamond blade can handle smaller Indian stone pieces. However, for cleaner, safer, and more precise results on full slabs, a bridge saw is strongly recommended. Ensure you wear PPE, use water suppression to control silica dust, and mark your cut lines clearly before cutting to avoid costly mistakes.

A segmented diamond blade designed for natural stone is the best choice for cutting Indian sandstone. Look for blades with a soft-to-medium bond to match sandstone's abrasive characteristics. When used with a bridge saw and a pressurized water supply — as included with the Avalanche Pro — diamond blades deliver clean edges, extended blade life, and reduced dust output.

Yes. The Avalanche Pro bridge saw is designed to process a wide range of materials including Indian sandstone, granite, marble, and engineered stone such as quartz. The 20 HP blade motor provides sufficient power for both soft sedimentary stone like sandstone and harder engineered surfaces, making it a versatile solution for mixed-material fabrication shops.

The Avalanche Pro – Manual + Automatic model supports air indexing to 90° and 45°, enabling standard straight cuts as well as miter cuts with a single-touch switch. The manual Avalanche Pro Bridge Saw also features in-plane rotation with on-angle locking and plunge-miter capability, which is essential for producing complex stone profiles used in countertops and architectural applications.

The Avalanche Pro – Manual + Automatic model is available in both single-phase and three-phase configurations. Single-phase requires 208–240 volts at 100 amps, while three-phase requires 208–240 volts at 60 amps. Additionally, compressed air between 80–120 PSI is needed for the hydraulic lift, air brake, and indexing features. Confirm your shop's electrical capacity before ordering.